Imidomethylation of C-nucleophiles using O-phthalimidomethyl trichloroacetimidate and catalytic amounts of TMSOTf

The O-phthalimidomethyl trichloroacetimidate (1), as a latent aminomethylating agent, exhibits high electrophilicity towards a variety of C-nucleophiles in the presence of catalytic amounts of TMSOTf and mild reaction conditions. The nucleophiles include aromatics, alkenes and active methylene compounds 2-11 whereby a phthalimidomethyl group could be introduced to give compounds 12-22. Removal of the phthaloyl group gave the respective amines, β-amino ketones, and β-amino acids. The O-(trichloroacetamido)methyl trichloroacetimidate (35) was also found to be a good amidomethylating agent.     

Direct evidence for the gas phase thermal polymerization of styrene. Determination of the initiation mechanism and structures of the early oligomers by ion mobility

We present here direct evidence for the thermal self-initiated polymerization of styrene in the gas phase and establish that the initiation process proceeds via essentially the same mechanism (the Mayo mechanism) as in condensed phase polymerization. Furthermore, we provide structural identifications of the dimers and trimers formed in the gas phase.     

An efficient and chemoselective method for protection of thiols catalyzed by aluminumdodecatungstophosphate (AlPW12O40), as a highly water tolerant Lewis acid catalyst

Protection of various thiols with diphenylmethanol was achieved in high yields at room temperature using catalytic amounts of AlPW₁₂O₄₀ in CH₂Cl₂. In the presence of this catalyst, protection of SH versus OH was achieved with high chemoselectivity and yields. The catalyst can be easily recovered and reused. Deprotection of DPM thioethers was also achieved using molecular iodine at reflux in CH₂Cl₂ in high yields.     

Photocatalytic ozonation degradation of ciprofloxacin using ZnO nanoparticles immobilized on the surface of stones

Ciprofloxacin is used in the treatment of bacterial infections. Because ciprofloxacin is not effectively degraded by biological processes, advanced oxidation processes such as photocatalytic ozonation are applied to remove this antibiotic from wastewater. The aim of this study was to investigate photocatalytic ozonation for the removal of ciprofloxacin from aquatic environments and optimization of the effective parameters of the process. For this purpose, ZnO nanoparticles were synthesized using the thermal method and immobilized on the surface of stones. The structural properties of the nanoparticles were determined by XRD, TEM, Photoluminescence (PL) and SEM. Experiments were carried out in a Plexiglas reactor supported with the continuous injection of ozone. The effective parameters for removal efficiency were reaction time, initial concentration of ciprofloxacin, pH, photocatalyst concentration and reaction kinetics. The highest ciprofloxacin removal efficiency occurred at the following optimal conditions: pH of 7, reaction time of 30?min, photocatalyst concentration of 3?g/L and initial ciprofloxacin concentration of 10?mg/L. Removal efficiency of 96% was obtained under these conditions. Linear kinetic models showed that the process followed pseudo-first order and Langmuir-Hinshelwood kinetics. This process had a high removal efficiency and suitable for removal of ciprofloxacin from aquatic environments.GRAPHICAL ABSTRACT     

An Easy One-Pot Procedure for the Synthesis of <Emphasis Type="Italic">N</Emphasis>-Sulfonyl Phosphorous Ylides and Sulfonyl Iminophosphoranes

Summary. Reaction of triphenylphosphine and an electron deficient acetylenic ester in the presence of strong N–H acid such as alkyl and aryl sulfamides or acetamide produces phosphorous ylides at room temperature in CH₂Cl₂. The aryl sulfamide phosphoranes undergo a smooth transformation reaction in boiling toluene and produce iminophosphoranes.     

Spectrophotometric and titrimetric determination of gallium in minerals and ores using semimethylthymol blue

The composition, overall stability constant and molar absorptivity of the chelate of gallium(III) ion with semimethylthymol blue, SMTB, were determined spectrophotometrically in acetate buffer (pH 4.5–5). A violet Ga(SMTB) chelate was formed with logarithmic overall stability constant of 18.0±0.1 (I=0.1) and molar absorptivity of 4.25×10⁴l mol^–1cm^–1 (_max 580 nm). SMTB is proposed as a new reagent for the spectrophotometric determination of micro-molar amounts of gallium(III). The colour development depends on time, temperature, pH and buffer species. The interference of different cations, anions and organic acids on gallium(III) determination was also investigated. Beer's law was obeyed for 3.5–31.3 gGa(III)/25ml (0.14–1.25 g ml^–1). SMTB was used for the spectrophotometric determination of gallium in different grade minerals and ores and the results were of acceptable error and relative standard deviation. Comparison between the two suggested methods and atomic absorption spectrometry for Ga(III) determination was carried out.     

Energy dispersive X-ray fluorescence analysis of chloride in reforming catalysts

A relatively less expensive Phillips PV 9500/SY 585 automatic energy dispersive X-ray fluorescence (EDXFR) spectrometer with rhodium target, was modified using a commercial kitchen aluminium wrapping foil filter, for the determination of chloride in bifunctional reforming catalysts. Quantitation of chloride was carried out by the Claisse-Quintin method with a catalyst sample of known chloride content as an external standard. The results of EDXRF chloride analysis of different catalyst samples, containing varying amounts of percent carbon and chloride, compared well (p>0.75) with those obtained by silver chloride precipitation method. The small values of percent relative standard deviations at 0.4 to 4.5% showed a good reproducibility of the method. With the total analysis time of a few minutes combined with no sample preparation, the present method seems to be superior as compared to presently employed methods of chloride analysis in reforming catalysts.     

Stepwise hydration and multibody deprotonation with steep negative temperature dependence in the benzene.+ -water system

We studied the stepwise hydration and solvent-mediated deprotonation of the benzene*+ cation (Bz*+) and found several unusual features. The solvent binding energies DeltaH on-1,n for the reactions Bz*+(H2O)n-1 + H2O --> Bz*+(H2O)n are nearly constant at 9 +/- 1 kcal mol-1 for n = 1 to 8. We observed a remarkable sudden decrease in the entropy of association accompanying the formation of Bz*+(H2O)7 and Bz*+(H2O)8, indicating strong orientational restraint in the hydration shells of these clusters consistent with the formation of cagelike structures. We observed the size-dependent deprotonation of Bz*+ in a cooperative multibody process, where n H2O molecules (n >/= 4) can remove a proton from Bz*+ to form protonated water clusters. We measured, for the first time, the temperature dependence of such a process and found a negative temperature coefficient of a magnitude unprecedented in any chemical reaction, of the form k = AT-67+/- 4, or in an Arrhenius form having an activation energy of -34 +/- 1 kcal mol-1. The temperature effect may be explained by Bz*+ and four H2O molecules needing to be assembled from gas-phase components to form the reactive species. Such large temperature effects may be therefore general in solvent cluster-mediated reactions.     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.     

Indirect Determination of Sulfide by Cold Vapor Atomic Absorption Spectrometry

A method for the determination of sulfide based on its interference with the determination of Hg by cold vapor atomic absorption spectrometry is described. The decrease in mercury absorbance at 253.7nm is proportional to the concentration of sulfide over the range of 10–320ngmL^–1. The limit of detection was found to be 7ngmL^–1 and the relative standard deviation (R.S.D.) for the determination of different concentrations of sulfide was in the range of 1.8–2.2%. This method was applied to the determination of sulfide in whole human blood after gas-phase separation.